S-15-□
 

Features 1.Low price and high reliablity. 2.105 degrees output capacitor. 3.AC input power suitable for the world. 4.High efficiency and low operation temperature. 5.Soft-start current can reduce the AC input impact effecticly. 6.With short-circuit and overload protection. 7.100% full-load burn-in test. 8.Installed with EMI filter,minimum wave.    Model S-15-5 S-15-12 S-15-24  DC output voltage 5V 12V 24V  Output ovltage range(Note:2) +-2% +-1% +-1%  Rated output current 3A 1.3A 0.7A  Output current range 0-3A 0-1.3A 0-0.7A  Wave and noise(Note:3) 50mVp-p 50mVp-p 100mVp-p  Intel stability(Note:4) +-0.5% +-0.5% +-0.5%  Load stability(Note:5) +-1% +-0.5% +-0.5%  DC Output power 15W 15.6W 16.8W  Efficiency 65% 68% 72%  Adjustable range for DC voltage +10%,-5% +-10% +-10%  AC input voltage range 85-132VAC/170-264VAC selected by switch 47-63Hz,240-370VDC  Input current 0.5A/115V 0.25A/230V  AC inrush current Cole-start current 15A/115V 30A/230V  Leakage current <0.5mA/240VAC  Over load protection 105%-150%M Type:pulsing hiccup shutdown Reset:auto recovery  Over-voltage protection 115%-135%  High-temperature protection ............  Temperature coefficient +-0.02% degrees(0-50 degrees)  Setup,rise,hold up time 200ms,100ms,30ms  Vibration 10-500Hz,2G 10min,/1cycle,period for 60min,each axes   Withstand voltage Input and output internal:1.5KvAC,Input and enclosure:1.5KvAC,Output and enclosure:0.5KvAC  Isolation resistance Input and output internal,Input and enclosure,Output and enclosure:500VDC/100MOhm  Working temperature and humidity -10 degrees-+60 degrees(Refer to output derating curve),20%-90%RH  Stoerall dimension -20 degrees-+85 degrees,10%-95%RH  Overall dimension 99*97*35mm  120*46*32mm  Weight 0.3kgs  Safety standards Meet UL 1012 requirement (Not apply for the mark)  EMC standards Meet FCC PART 15J Conduction class B  Note: 1.The testing condition for the paramenter above is:230VAC input,rated load,25 degrees 70%RH,Temperature. 2.Error:Include the setting error,line stability and load stability.(Note:5) 3.Wave test:adoping A12 doubl wire for 20MHz,nd 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stavility test:The load is from 0% to 100%.